Instructions
- The working mode of the machine is controlled by the power supply
- Open the box, check whether the accessories are complete, take out the host, remove the antenna protection cap, and install the antenna; the numbers on the antenna are tightened one by one with the numbers on the host.
-Make sure that the antenna is correct, turn on the power switch, and observe that each green indicator on the host lights up.
-Please charge for 10-12H for the first time. When charging, you need to observe the charging indicator. If the charging indicator turns off, the charging is complete.
Feature:
1: Effectively prevent being tracked by GPS satellite positioning, protect your whereabouts privacy and information confidentiality
2: At the same time effectively shield CDMA/GSM/DCS/PHS/3G/4G and other mobile phone signals
3: Can block 2.4GWIFI and wireless stealth signals
4: Small size, high power, light weight, large coverage, easy to carry
5: The device comes with a rechargeable battery, which can be recharged and used for 2 hours once charged.
6: Long service life, internal battery protection function, constant current and constant voltage charging with overcurrent and overheat protection, charging status indication, and charging current detection. If it has not been used for a long time, please pay attention to the maintenance charging every half month.
Packing List:
1 * Jammer host
1 * Manual
1 * Car charger
10* Antennas
Precautions:
The farther the portable unit is from the base station, the farther the shielding distance will be. For example, in GSM, when the signal field strength of the base station at the installation point is -75dBmv, the maximum distance between the shielding center is about 2 meters. The greater the signal field strength of the base station, the smaller the shielding distance. When the signal field strength of the base station is greater than -35dBmv, the maximum distance of the shielding center is only 0.5-1 meters.
The shielding range refers to the circular area centered on the machine. The shielding signal is sent by the host and spreads outward from strong to weak. Appropriate placement should be selected at the application site, and cellular placement should be adopted to make the shielded signal evenly distributed.
Human bodies, objects, walls, etc. will block the transmission of shielded signals. When using, try to avoid obstacles.
The cell phone jammer should be used in a cool and dry place, avoiding direct sunlight and rain and fog invasion.
