• Welcome to jammer-mart device online shop.

How does a wifi jammer interfere with your cell phone signal?

Admin Posted on 2022-10-20

Many users who use wifi jammer do not understand their working principle and often use them beyond the frequency range, resulting in poor use.

The working principle of mobile communication is that within a certain frequency range, wireless devices (mobile phones, etc.) and base stations communicate through radio waves to complete data and sound transmission with a certain baud rate and modulation method. When the mobile phone communicates, it contacts the base station through the uplink frequency and then transfers the signal to the mobile service switching center to realize the call. In the standby state, the mobile phone communicates with the base station through the broadcast control channel. Once there is a need for a call, the mobile phone will first be assigned to the mobile phone business channel according to the specific conditions of the channel near the terminal through the request, so that the mobile phone will jump to the business channel to realize the call and data transmission. . At the same time, wireless communication must ensure sufficient signal-to-noise ratio to effectively receive and complete the communication.

The interference process of wifi jammer

According to the above working principle, the wifi signal jammer is generally composed of a power supply, electronic scanning control unit, segmented radio frequency module unit, amplifier unit, transmitting antenna unit, and other parts. After the signal generator generates the scanning signal, it goes through the inverter, enters the oscillator and modulates it to the mobile communication working frequency band, and then is amplified by the power amplifier and the voltage regulator tube controls the power. The amplified frequency scanning signal is transmitted into the air in the form of radio waves. Because the frequency sweep signal forms garbled interference in the message signal received by the mobile phone (increase the ratio of the noise signal to the device threshold), the mobile phone cannot receive the normal data sent by the base station, so the mobile phone cannot establish a normal connection with the base station so that the mobile phone is disconnected. Base station communication network. The mobile phone shows the phenomenon that the search network has no signal, no service system, etc., to achieve the blocking effect.

wifi bluetooth wireless jammer

The interference power of the shield is fixed, and the shielding radius of the unobstructed space is determined by the path attenuation and the signal level of the receiving base station. In order to realize the interference of the wifi frequency jammer to the mobile network, it must be ensured that the signal field emitted by the wifi jammer device is stronger than the field strength of the mobile signal in the interference area. The closer the interference location is to the base station, the stronger the field strength and the smaller the effective interference area. Conversely, the farther the interference location is from the base station, the weaker the field strength and the larger the effective interference area.

It can be seen that within a certain transmission power, the interference range depends on the field strength in the interference area. No matter how much power the wireless wifi jammer is, as long as the transmission power is a fixed value, as the distance increases, the interference signal strength will gradually attenuate, thus Losing the ability to interfere.

ontinue to browse other related content.

5g wifi scrambler
How to reduce the WIFI signal?
Wifi jammer helps improve study efficiency
The importance of shielding layer for wifi jammer
What are the functional characteristics of 5G wifi jammer?
How to crack the signal jammer?
High quality connector shielding gasket produced good wifi jammer
Introduction to the characteristics of hand-held wifi jammer