Military signal jammer is a new type of information security product. It uses specific electromagnetic signals to form a shielding area in the place that needs to be shielded, so that mobile phones cannot receive base stations. data, disconnect from the base station. When installing a signal shielding device in a detention center, what should be paid attention to, the following will introduce to you.
1. Before installing the signal shielding device of the detention center, first understand the direction of the base station, and try to make the direction of the signal shielding device of the detention center follow the direction of the base station.
2. When installing equipment, check whether there are metal objects around the machine to prevent signal reflection from affecting the shielding effect of the detention center signal jammer.
3. The best installation height of the military signal jammer in the detention center is about 1.8-2 meters. It can be placed directly on the table, on the wall or installed on the ceiling. The antenna is best placed perpendicular to the ground.
4. If you install a detention center military signal jammer indoors, you should pay attention to whether there is an amplifier such as indoor signal enhancement. If there is a signal enhancement device, it is not suitable to install a detention center signal jammer.
5. Knowing the signal strength of the scene is very important for the installation of the signal shielding device in the detention center. Because there are many kinds of signals in an environment, and the strength of each kind of signal is different, so knowing the signal strength of the scene can be targeted to design and install the signal shielding device of the detention center.
6. According to the results of on-site investigation, reasonable matching for different signals has reached the most ideal state.